Loading ...
Loading ...
Loading ...
366 STARTING AND OPERATING
from solid yellow to flashing yellow. At this time torque is
applied to the steering wheel in the opposite direction of
the lane boundary.
For example: If approaching the left side of the lane the
steering wheel will turn to the right.
Lane Approached (Flashing Yellow Thick Line, Solid
Yellow Thin Line/Flashing Yellow Telltale)
NOTE:
The LaneSense system operates with similar behavior for a
right lane departure.
Changing LaneSense Status
The LaneSense system has settings to adjust the intensity of
the torque warning and the warning zone sensitivity (early/
late) that you can configure through the Uconnect system
screen. Refer to “Uconnect Settings” in “Multimedia” for
further information.
NOTE:
• When enabled the system operates above 37 mph (60 km/h)
and below 112 mph (180 km/h).
• Use of the turn signal suppresses the warnings.
• The system will not apply torque to the steering wheel
whenever a safety system engages (anti-lock brakes, trac-
tion control system, electronic stability control, forward
collision warning, etc.).
PARKVIEW REAR BACK UP CAMERA
Your vehicle is equipped with the ParkView Rear Back Up
Camera that allows you to see an on-screen image of the rear
surroundings of your vehicle whenever the gear selector is
put into REVERSE (R). The image will be displayed in the
touchscreen display along with a caution note to “check
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 366
Loading ...
Loading ...
Loading ...