User Manual - Page 337

For 2020 JEEP CHEROKEE.

Loading ...
Loading ...
Loading ...
334 STARTING AND OPERATING
the driver will be required to manually complete the
parking maneuver.
The system may not work in all conditions (e.g. environ-
mental conditions such as heavy rain, snow, etc., or if
searching for a parking space that has surfaces that will
absorb the ultrasonic sensor waves).
New vehicles from the dealer must have at least 30 miles
(48 km) accumulated before the ParkSense Active Park
Assist system is fully calibrated and performs accurately.
This is due to the system’s dynamic vehicle calibration to
improve the performance of the feature. The system will
also continuously perform the dynamic vehicle calibration
to account for differences such as over or under inflated
tires and new tires.
Enabling And Disabling The ParkSense Active Park
Assist System
The ParkSense Active Park Assist system can be enabled and
disabled with the ParkSense Active Park Assist switch,
located on the switch panel below the Uconnect display.
To enable the ParkSense Active Park Assist system,
push the ParkSense Active Park Assist switch once
(LED turns on).
To disable the ParkSense Active Park Assist system, push the
ParkSense Active Park Assist switch again (LED turns off).
The ParkSense Active Park Assist system will turn off auto-
matically for any of the following conditions:
The parking maneuver is completed
Vehicle speed greater than 18 mph (30 km/h) when
searching for a parking space
Vehicle speed greater than 5 mph (7 km/h) during active
steering guidance into the parking space
Touching the steering wheel during active steering guid-
ance into the parking space
Pushing the ParkSense Front and Rear Park Assist switch
Driver's door is opened
Rear liftgate is opened
Electronic Stability Control/Anti-Lock Braking System
intervention
The ParkSense Active Park Assist system will allow a
maximum number of shifts between DRIVE (D) and
REVERSE (R). If the maneuver cannot be completed
within the maximum amount of shifts, the system will
cancel and the instrument cluster display will instruct the
driver to complete the maneuver manually.
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 334
Loading ...
Loading ...
Loading ...