Loading ...
Loading ...
Loading ...
386 STARTING AND OPERATING
6. Using a ballpoint pen or similar object, push and hold the
recessed NEUTRAL (N) button (located by the selector
switch) for four seconds. The light behind the N symbol
will blink, indicating shift in progress. The light will stop
blinking (stay on solid) when the shift to NEUTRAL (N)
is complete.
Neutral Button
7. After the shift is completed and the NEUTRAL (N) light
stays on, release the NEUTRAL (N) button.
8. Start the engine.
9. Apply the parking brake.
10. Shift the transmission into REVERSE (R).
11. Release the brake pedal for five seconds and ensure that
there is no vehicle movement.
12. Shift the transmission to NEUTRAL.
13. Release the parking brake.
14. Shift the transmission into PARK, turn the engine OFF,
and remove the key fob.
15. Attach the vehicle to the tow vehicle using a suitable tow
bar.
16. Turn the ignition to the ON/RUN mode, but do not start
the engine.
17. Press and hold the brake pedal.
18. Release the parking brake.
19. Turn the ignition OFF, remove the key fob, and release
the brake pedal.
NOTE:
• When towing this vehicle behind another vehicle, the
parking brake must be released.
• Steps 1 through 5 are requirements that must be met before
pushing the NEUTRAL (N) button, and must continue to
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 386
Loading ...
Loading ...
Loading ...