Loading ...
Loading ...
Loading ...
SERVICING AND MAINTENANCE 461
Rear Wiper Blade Removal/Installation
1. Lift the rear wiper arm pivot cap away from the glass to
allow the rear wiper blade to be raised off of the glass.
NOTE:
The rear wiper arm cannot be fully raised off the glass unless
the wiper arm pivot cap is unsnapped first. Attempting to
fully raise the rear wiper arm without unsnapping the wiper
arm pivot cap may damage the vehicle.
Wiper Pivot Cap In Unlocked Position
2. Lift the rear wiper arm fully off the glass.
Wiper Blade In Folded Out Position
3. To remove the wiper blade from the wiper arm, grasp the
bottom end of the wiper blade nearest to wiper arm with
your right hand. With your left hand hold the wiper arm
as you pull the wiper blade away from the wiper arm past
its stop far enough to unsnap the wiper blade pivot pin
from the receptacle on the end of the wiper arm.
1 — Wiper Arm Pivot Cap
2 — Wiper Arm
1 — Wiper Arm Pivot Cap
2 — Wiper Blade
3 — Wiper Arm
7
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 461
Loading ...
Loading ...
Loading ...