Loading ...
Loading ...
Loading ...
2-30
COPIER
Contents
ORIGINAL SIZES
SPECIFYING THE ORIGINAL SIZE
The original size is set in "Default original size setting" in the system settings (administrator), and the setting appears in
the [Original] key. This section explains the procedure for specifying the setting when the original size is different from
size shown in the [Original] key.
Touch the [Original] key and perform the following.
Specifying an inch original size
(1) The original output destination for the
automatic document feeder can be
selected.
(2) Touch the appropriate original size key.
When a card size original is set in the
automatic document feeder, the card size can
be selected.
(3) Touch the [OK] key.
Specifying an AB original size
(1) Touch the [AB Inch] key.
(2) Touch the appropriate original size key.
(3) Touch the [OK] key.
Original
OK
Size Input
Custom Size
Card Size
Check Size
Inch
AB
None
5½x8½
8½x13
8½x11
8½x14
8½x13
2
5
Heavy Exit
Original Exit
Place
Upper Exit
(1) (2) (3)
Original
OK
A5
B5
Size Input
216x343
A4
216x330 16K
216x340
Custom Size
Card Size
Check Size
Inch
AB
None
Heavy Exit
Original Exit
Place
Upper Exit
(3)(1)(2)
• System Settings (Administrator): Default original size setting
Set this if you frequently use a particular original size. The set size will appear in the [Original] key.
When this setting is configured, changing the original size can be omitted.
• System settings (Administrator): Setting of Default Original Exit Place
When the automatic document feeder is used, the original's default output destination can be set to the upper exit or the
heavy exit. (Except when "Size Input" or "Card Size" is selected for the original size.)
• In the situations below, the original exit place is fixed to the heavy exit.
- When "Card Size" is selected
- When the original guide is set to 2 7/8" (74 mm) or lower (Except when "Check Size" is selected)
- When the automatic document feeder is scanning an original with an X (horizontal) value of 4 1/8" (105 mm) or less
• When "Card Size" is selected, you cannot copy if the original guide is set to 2 7/8" (74 mm) or higher.
Loading ...
Loading ...
Loading ...