Loading ...
Loading ...
Loading ...
• To turn the FCW system back on, press the for-
ward collision button again to turn the system on.
NOTE:
• The default status of FCW is “on”, this allows the
system to warn you of a possible collision with the
vehicle in front of you.
• Changing the FCW status to “off” prevents the
system from warning you of a possible collision
with the vehicle in front of you. If FCW is set to
“off”, “FCW OFF” will be displayed in the instru-
ment cluster display.
Changing FCW Status
The FCW feature has three settings and can be
changed within the Uconnect System Screen:
•Far
• Medium
• Near
Far
The far setting provides warnings for potential col-
lisions more distant in front of the vehicle, allowing
the driver to have the most reaction time to avoid a
collision.
More cautious drivers that do not mind frequent
warnings may prefer this setting.
NOTE:
This setting gives you the most reaction time.
Medium
The default status of FCW is the “Medium” setting
and “Warning And Braking” is in the “on” setting.
This allows the system to warn the driver of a pos-
sible collision with the vehicle in front using audible/
visual warnings and it applies autonomous braking.
Near
Changing the FCW status to the “Near” setting,
allows the system to warn you of a potential frontal
collision when you are much closer.
This setting provides less reaction time than the
“Far” setting, which allows for a more dynamic driv-
ing experience.
More dynamic or aggressive drivers that want to
avoid frequent warnings may prefer this setting.
NOTE:
Changing the “Warning And Braking” status to
“off” prevents the system from providing autono-
mous braking, or additional brake support if the
driver is not braking adequately in the event of a
potential frontal collision. “Warning And Braking”
can be turned “off” in the Uconnect controls set-
tings.
Refer to the Owner's Manual for further
information.
WARNING!
Forward Collision Warning (FCW) is not in-
tended to avoid a collision on its own, nor can
FCW detect every type of potential collision.
The driver has the responsibility to avoid a colli-
sion by controlling the vehicle via braking and
steering. Failure to follow this warning could lead
to serious injury or death.
General Information
The following regulatory statement applies to all
Radio Frequency (RF) devices equipped in this
vehicle:
This device complies with Part 15 of the FCC Rules
and with Industry Canada license-exempt RSS stan-
dard(s). Operation is subject to the following two
conditions:
SAFETY
90
Loading ...
Loading ...
Loading ...