Loading ...
Loading ...
Loading ...
5. Sit back in seat. Slide the regular latch plate up
the webbing as far as necessary to allow the seat
belt to go around your lap.
6. When the seat belt is long enough to fit, insert
the latch plate into the buckle until you hear a
“click.”
7. Position the lap belt so that it is snug and lies low
across your hips, below your abdomen. To re-
move slack in the lap belt portion, pull up on the
shoulder belt. To loosen the lap belt if it is too
tight, pull on the lap belt. A snug seat belt re-
duces the risk of sliding under the seat belt in a
collision.
8. Position the shoulder belt on your chest so that it
is comfortable and not resting on your neck. The
retractor will withdraw any slack in the seat belt.
9. To release the seat belt, push the red button on
the buckle.
10. To disengage the mini-latch plate from the
mini-buckle for storage, insert the regular latch
plate into the center red slot on the mini-buckle.
The seat belt will automatically retract to its
stowed position. If necessary, slide the latch
plate down the webbing to allow the seat belt to
retract fully. Insert the mini-latch plate and
regular latch plate into its stowed position.
WARNING!
• If the mini-latch plate and mini-buckle are not
properly connected when the seat belt is used
by an occupant, the seat belt will not be able to
provide proper restraint and will increase the
risk of injury in a collision.
• When reattaching the mini-latch plate and
mini-buckle, ensure the seat belt webbing is
not twisted. If the webbing is twisted, follow
the preceding procedure to detach the mini-
latch plate and mini-buckle, untwist the web-
bing, and reattach the mini-latch plate and
mini-buckle.
Connect Mini-Latch To Mini-Buckle Mini-Latch And Mini-Buckle Connected
101
Loading ...
Loading ...
Loading ...