Loading ...
Loading ...
Loading ...
Automatic High Beam — If Equipped
The Automatic High Beam system provides in-
creased forward lighting at night by automating
high beam control through the use of a digital cam-
era mounted on the windshield. This camera de-
tects vehicle specific light and automatically
switches from high beams to low beams until the
approaching vehicle is out of view.
NOTE:
Broken, muddy, or obstructed headlights and tail-
lights of vehicles in the field of view will cause head-
lights to remain on longer (closer to the vehicle).
Also, dirt, film and other obstructions on the wind-
shield or camera lens will cause the system to func-
tion improperly.
To Activate
1. Select “Automatic High Beams — ON” through
the Uconnect system. Refer to "Uconnect Set-
tings” in “Multimedia” in your Owner’s Manual
for further information.
2. Rotate the headlight switch clockwise to the
AUTO position.
3. Push the multifunction lever away from you to
switch the headlights to the high beam position.
Refer to “Multifunction Lever” for further
information.
NOTE:
This system will not activate until the vehicle is at, or
above 16 mph (25 km/h).
To Deactivate
Perform either of the following steps to deactivate
the Automatic High Beam system.
1. Select “Automatic High Beams — OFF” through
the Uconnect System. Refer to “Uconnect Set-
tings” in “Multimedia” in your Owner’s Manual
for further information.
2. Pull the multifunction lever toward you to switch
the headlights from the high beam to the low
beam position.
3. Rotate the headlight switch counterclockwise
from the AUTO to the on position.
NOTE:
Once active, the Automatic High Beam system will
stop functioning below 12 mph (20 km/h).
Flash-To-Pass
You can signal another vehicle with your headlights
by lightly pulling the multifunction lever toward you.
This will cause the high beam headlights to turn on,
and remain on, until the lever is released.
Automatic Headlights
This system automatically turns your headlights on
or off based on ambient light levels. To turn the
system on, turn the headlight switch to the extreme
clockwise position aligning the indicator with the
AUTO on the headlight switch. When the system is
on, the Headlight Time Delay feature is also on.
This means your headlights will stay on for up to
90 seconds after you turn the ignition switch OFF.
To turn the Automatic System off, turn the head-
light switch counterclockwise to the O (off) posi-
tion.
NOTE:
The vehicle must be running before the headlights
will come on in the Automatic mode.
45
Loading ...
Loading ...
Loading ...