Loading ...
Loading ...
Loading ...
STARTING THE VEHICLE
Before starting your vehicle, adjust your seat, adjust
both inside and outside mirrors, and fasten your seat
belts.
WARNING!
• When exiting the vehicle, always remove the
key fob from the vehicle and lock your vehicle.
• Never leave children alone in a vehicle, or with
access to an unlocked vehicle.
• Allowing children to be in a vehicle unat-
tended is dangerous for a number of reasons.
A child or others could be seriously or fatally
injured. Children should be warned not to
touch the parking brake, brake pedal or the
transmission gear selector.
• Do not leave the key fob in or near the vehicle,
or in a location accessible to children, and do
not leave the ignition of a vehicle equipped
with Keyless Enter-N-Go in the ACC or ON/
RUN mode. A child could operate power win-
dows, other controls, or move the vehicle.
• Do not leave children or animals inside parked
vehicles in hot weather. Interior heat build-up
may cause serious injury or death.
Request Propulsion System Active (PSA) or “Ve-
hicle is Ready to Drive” mode with the gear selector
in the PARK position. Apply the brake before shift-
ing to any driving range.
NOTE:
In case the ignition switch does not change with the
push of a button, the key fob may have a low or
dead battery. In this situation, a back up method can
be used to operate the ignition switch. Put the nose
side of the key fob (side opposite of the Emergency
Key) against the ENGINE START/STOP button
and push to operate the ignition switch.
Normal Starting
NOTE:
Normal starting of either a cold or a warm engine is
obtained without pumping or pressing the accelera-
tor pedal.
Achieving vehicle READY using the ENGINE
START/STOP button.
1. The transmission must be in PARK or
NEUTRAL.
2. Press and hold the brake pedal while pushing the
ENGINE START/STOP button once.
3. The READY indicator will appear in the cluster
when the vehicle is in ready to drive mode, which
may include the start of the engine depending
on conditions such as battery state of charge and
engine temperature.
4. If you wish to terminate Vehicle is Ready to Drive
mode, push the button again.
ENGINE START/STOP Button Functions —
With Driver’s Foot OFF The Brake Pedal (In
PARK Or NEUTRAL Position)
The ENGINE START/STOP button operates simi-
lar to an ignition switch by providing three positions:
OFF, ACC and RUN. To change the ignition mode
without starting the vehicle (to power certain acces-
sories), follow these steps:
1. Starting with the ignition in the OFF mode.
2. Push the ENGINE START/STOP button once,
without brake pedal being pressed, to place the
ignition in the ACC mode (instrument cluster
will display “ACC”).
3. Push the ENGINE START/STOP button a sec-
ond time, without brake pedal being pressed, to
place the ignition in the RUN mode (instrument
cluster will display “Ignition or Accessor y On”).
STARTING AND OPERATING
138
Loading ...
Loading ...
Loading ...