Loading ...
Loading ...
Loading ...
— Low Washer Fluid Warning Light — If
Equipped
This warning light will illuminate when the wind-
shield washer fluid is low.
— Adaptive Cruise Control (ACC)
Fault Warning Light — If Equipped
This warning light will illuminate to indicate a fault in
the ACC system. Contact a local authorized dealer
for service.
For further information, refer to “Adaptive Cruise
Control (ACC)” in “Starting And Operating.”
— Service Forward Collision Warning
(FCW) Light — If Equipped
This warning light will illuminate to indicate a fault in
the Forward Collision Warning System. Contact an
authorized dealer for service.
Refer to "Forward Collision Warning (FCW)" in
"Safety" for further information.
— Engine Check/Malfunction Indica-
tor Warning Light (MIL)
The Engine Check/Malfunction Indicator Light
(MIL) is a part of an Onboard Diagnostic System
called OBD II that monitors engine and automatic
transmission control systems. This warning light will
illuminate when the ignition is in the ON/RUN
position before engine start. If the bulb does not
come on when turning the key from OFF to ON/
RUN, have the condition checked promptly.
The vehicle should be serviced if the light stays on
through several typical driving styles. In most situa-
tions, the vehicle will drive normally.
When the engine is running, the MIL may flash to
alert serious conditions that could lead to immedi-
ate loss of power or severe catalytic converter dam-
age. The vehicle should be serviced as soon as
possible if this occurs.
WARNING!
A malfunctioning catalytic converter, as refer-
enced above, can reach higher temperatures
than in normal operating conditions. This can
cause a fire if you drive slowly or park over flam-
WARNING!
mable substances such as dry plants, wood, card-
board, etc. This could result in death or serious
injury to the driver, occupants or others.
CAUTION!
Prolonged driving with the Malfunction Indica-
tor Light (MIL) on could cause damage to the
vehicle control system. It also could affect fuel
economy and driveability. If the MIL is flashing,
severe catalytic converter damage and power
loss will soon occur. Immediate service is re-
quired.
— Tire Pressure Monitoring System
(TPMS) Warning Light
The warning light switches on and a message is
displayed to indicate that the tire pressure is lower
than the recommended value and/or that slow pres-
sure loss is occurring. In these cases, optimal tire
duration and fuel consumption may not be guaran-
teed.
GETTING TO KNOW YOUR INSTRUMENT PANEL
82
Loading ...
Loading ...
Loading ...