Loading ...
Loading ...
Loading ...
ter display to prompt the driver to remain within the
lane. When only a single lane marking is detected, a
haptic (torque) warning will not be provided.
NOTE:
When operating conditions have been met, the
LaneSense system will monitor if the driver’s hands
are on the steering wheel and provides an audible
and visual warning to the driver when the driver’s
hands are not detected on the steering wheel. The
system will cancel if the driver does not return their
hands to the wheel.
Turning LaneSense On Or Off
The LaneSense button is located on
the switch panel below the Uconnect
display.
To turn the LaneSense system on, push the Lane-
Sense button (LED turns off). A “LaneSense On”
message is shown in the instrument cluster display.
To turn the LaneSense system off, push the Lane-
Sense button again (LED turns on).
NOTE:
The LaneSense system will retain the last system
state on or off from the last ignition cycle when the
ignition is changed to the ON/RUN position.
LaneSense Warning Message
The LaneSense system will indicate the current lane
drift condition through the instrument cluster dis-
play.
Instrument Cluster Display
When the LaneSense system is ON; the lane lines
are gray when both of the lane boundaries have not
been detected and the LaneSense telltale
is
solid white.
Left Lane Departure — Only Left Lane Detected
• When the LaneSense system is ON, the Lane-
Sense Telltale
is solid white only when the left
lane marking has been detected and the system is
ready to provide visual warnings in the instrument
cluster display if an unintentional lane departure
occurs on the left side.
• When the LaneSense system senses the lane has
been approached and is in a lane departure situa-
tion, the visual warning in the instrument cluster
display will show the left inside lane line flashing
yellow (on/off), while the outside lane line on the
left of the display will remain solid yellow. The
LaneSense telltale
changes from solid white
to flashing yellow.
NOTE:
The LaneSense system operates with the similar
behavior for a right lane departure when only the
right lane marking has been detected.
Left Lane Departure — Both Lane Lines De-
tected
• When the LaneSense system is ON, the lane lines
turn from gray to white. The LaneSense telltale
is solid green when both lane markings have
been detected and the system is “armed” to pro-
vide visual warnings in the instrument cluster dis-
play and a torque warning in the steering wheel if
an unintentional lane departure occurs.
• When the LaneSense system senses a lane drift
situation, the left inside and outside lane lines turn
solid yellow. The LaneSense telltale
changes
from solid green to solid yellow. At this time torque
is applied to the steering wheel in the opposite
direction of the lane boundary.
For example: If approaching the left side of the lane
the steering wheel will turn to the right.
157
Loading ...
Loading ...
Loading ...