Loading ...
Loading ...
Loading ...
Different colored zones indicate the distance to the
rear of the vehicle.
Modes Of Operation
“Manual” activation of the Surround View camera is
selected by pressing the Surround View Camera
soft key located in the “Controls” screen within the
Uconnect system.
Top View
The Top view will show in the Uconnect System with
Rear View and Front View in a split view display.
There is integrated ParkSense arcs in the image at
the front and rear of the vehicle. The arcs will
change color from yellow to red corresponding the
distance zones to the oncoming object.
NOTE:
• Front tires will be in image when the tires are
turned.
• Due to wide angle cameras in mirror, the image will
appear distorted.
• Top view will show which sliding doors are open.
• Open front doors will remove outside image.
Rear View
This is the Default view of the system in REVERSE
and is paired with a Top view of the vehicle with
active guide lines for the projected path when en-
abled.
Rear Cross Path View
Pressing the Rear Cross Path soft key will give the
driver a wider angle view of the rear camera system.
The Top view will be disabled when this is selected.
Front View
The Front view will show you what is immediately in
front of the vehicle with guide lines for the pro-
jected path when enabled.
Front Cross Path View
Pressing the Front Cross Path soft key will give the
driver a wider angle view of the front camera sys-
tem. The Top view will be disabled when this is
selected.
Deactivation
The system can be deactivated in the following
conditions:
• The speed of the vehicle reaches greater than
8 mph (13 km/h).
• The vehicle shifted into PARK from a different
gear.
• If the vehicle is in any gear other than REVERSE,
press the “X” button.
• The camera delay system is turned off manually
through the Uconnect settings menu. Refer to
“Uconnect Settings” in “Multimedia” in the Own-
er’s Manual for further information.
NOTE:
• If snow, ice, mud, or any foreign substance builds
up on the camera lenses, clean the lenses, rinse
with water, and dry with a soft cloth. Do not cover
the lenses.
• If a malfunction with the system has occurred, see
your nearest authorized dealer.
STARTING AND OPERATING
160
Loading ...
Loading ...
Loading ...