Loading ...
Loading ...
Loading ...
To access the portable charging cord set, open the
door of the cargo area storage bin, on the driver’s
side, and remove the charging cord set from the
storage bag.
NOTE:
After use, the EVSE should be placed in the carrier
bag and put back to the cargo area storage bin.
NOTE:
The portable charging cord set is used for AC Level
1 charging only.
WARNING!
• Read all the instructions before using this
product.
• Do not put fingers or objects into the Charge
Connector.
• Do not use this product if the flexible power
cord or Electric Vehicle (EV) Cable is frayed,
broken, has cracked insulation or any other
signs of damage.
• Do not use this product if the enclosure or the
Charge Connector is broken, cracked, open,
or shows any other indication of damage.
WARNING!
• Do not use Portable EVSE Cordset with an
extension cord. Use of an extension cord may
cause burns, fire, or other damage or injury.
• This device may attempt to reset and run after
an interruption.
• There are no user serviceable parts inside the
AC Level 1 charging cord set. Do not attempt
to repair or service the charging cord set your-
self – personal injury may result.
• When using a charging station with the charg-
ing cable attached, ensure the cable is not
visibly damaged before plugging into the ve-
hicle.
• Do not allow children to operate this device.
Adult supervision is mandatory when children
are in proximity to a charge station that is in
use.
• Do not use a charge station or vehicle recep-
tacle that is worn or damaged with the AC
Level 2 charging cable. Plugging into worn or
damaged receptacles may cause damage to
the EVSE and vehicle.
• Ensure that the EVSEs are always stored in a
safe place. Do not expose them to rain or wet
conditions. Avoid allowing water or other liq-
WARNING!
uids to pour or drip on the EVSE. If water
penetrates the electrical device, the risk or
electrical shock increases. Ensure that all plugs
and cables are free of moisture before using
the EVSEs.
Charging Cordset Operation
1. Plug the AC plug of the charging cordset into a
15 A, or 20 A, 120 VAC, 60 Hz, grounded wall
receptacle. Do not use an extension cord, outlet/
plug adapter, or a worn outlet. The charging
cordset will not operate safely unless it is plugged
directly into the wall receptacle.
NOTE:
The EVSE should be plugged into a dedicated
circuit, not a circuit shared with other devices
drawing electricity on the circuit.
11
Loading ...
Loading ...
Loading ...