Loading ...
Loading ...
Loading ...
Reinstalling Seat
1. To reinstall the seat, align the seat’s front attach-
ments into the detent positions on the floor.
2. Tilt seat rearward to lock the seat back into its
original position.
NOTE:
Push downward to ensure the rear latches are in
the locked position.
3. Lift the recline handle and return the seat back to
the seating position.
WARNING!
If not properly latched, the seat could become
loose. Personal injuries could result.
Manually Folding Third Row Seats — If
Equipped
1. Lower the center head restraint down to the
seatback by pushing the button on the guide and
pushing the head restraint down.
2. Pull release strap marked “1” to release the
anchors.
3. Pull release strap marked “2” and tumble the seat
rearward into the storage bin.
To Unfold Third Row Seats
1. Pull up on the assist strap to lift the seat out of the
storage bin and push the seat for ward until the
anchors latch.
2. Pulling strap “2” releases the seatback to return
to its full upright position.
3. Raise the head restraint to its upright position.
WARNING!
• In a collision, you or others in your vehicle
could be injured if seats are not properly
latched to their floor attachments. Always be
sure the seats are fully latched.
• Sitting in a seat with the head restraint in its
lowered position could result in serious injury
or death in a collision. Always make sure the
head restraints are in their upright positions
when the seat is to be occupied.
Driver Memory Seat — If Equipped
The Memory Buttons (1) and (2) on the driver's
door panel can be programmed to recall the driver's
seat, outside mirrors, and radio station preset set-
tings. Your key fobs can also be programmed to
recall the same positions when the unlock button is
pushed.
Your vehicle may have been delivered with two key
fobs, one key fob can be linked to each of the
memory positions.
Driver Memory Switch
35
Loading ...
Loading ...
Loading ...