Loading ...
Loading ...
Loading ...
and where possible, route the tether strap under
the head restraint and between the two posts. If
not possible, lower the head restraint and pass
the tether strap around the outboard side of the
head restraint.
3. Attach the tether strap hook of the child restraint
to the top tether anchorage as shown in the
diagram.
4. Remove slack in the tether strapaccording to the
child restraint manufacturer’s instructions.
WARNING!
• An incorrectly anchored tether strap could
lead to increased head motion and possible
injury to the child. Use only the anchorage
position directly behind the child seat to se-
cure a child restraint top tether strap.
• If your vehicle is equipped with a split rear seat,
make sure the tether strap does not slip into
the opening bet ween the seatbacks as you
remove slack in the strap.
Third Row Tether Attachment
The tether anchorage found on the back of the 60%
seat in the third row may be used by either the left
outboard or the center seating position. Only tether
one child restraint to the tether anchorage at a time.
To connect the tether strap hook to the tether an-
chorage for either seating position on the 60% third
row seat:
1. Route the tether strap to provide the most direct
path for the strap between the anchor and the
child seat.
2. If the car seat is in the center, raise the center
head restraint and route the tether strap around
the inboard (left) side of the head restraint sup-
port posts, as shown in the diagram.
3. Attach the tether strap hook of the child restraint
to the top tether anchorage as shown in the
diagram.
4. Remove slack in the tether strapaccording to the
child restraint manufacturer’s instructions.
Rear Seat Tether Strap Attachment
(Second Row Anchorage Shown)
Center Tether Attachment – 3rd Row
133
Loading ...
Loading ...
Loading ...