Loading ...
Loading ...
Loading ...
Installing Child Restraints Using The Vehicle
Seat Belt
Child restraint systems are designed to be secured
in vehicle seats by lap belts or the lap belt portion of
a lap/shoulder belt.
WARNING!
• Improper installation or failure to properly se-
cure a child restraint can lead to failure of the
restraint. The child could be badly injured or
killed.
• Follow the child restraint manufacturer’s di-
rections exactly when installing an infant or
child restraint.
The seat belts in the passenger seating positions are
equipped with a Switchable Automatic Locking Re-
tractor (ALR) that is designed to keep the lap por-
tion of the seat belt tight around the child restraint
so that it is not necessary to use a locking clip. The
ALR retractor can be “switched” into a locked mode
by pulling all of the webbing out of the retractor and
then letting the webbing retract back into the re-
tractor. If it is locked, the ALR will make a clicking
noise while the webbing is pulled back into the
retractor.
Refer to the “Automatic Locking Mode” descrip-
tion in “Switchable Automatic Locking Retractors
(ALR)” under “Occupant Restraint Systems” for
additional information on ALR.
Please see the table below and the following sec-
tions for more information.
Lap/Shoulder Belt Systems For Installing
Child Restraints In This Vehicle
7 Passenger Quad Seat Automatic Locking
Retractor (ALR) Locations
ALR = Switchable Automatic Locking Retrac-
tor
— Top Tether Anchorage Symbol
SAFETY
128
Loading ...
Loading ...
Loading ...