Loading ...
Loading ...
Loading ...
468
8-2. Steps to take in an emergency
COROLLA HV_U
lar as shown. (P.5 01 )
12Start the hybrid system.
13To inject the sealant and
inflate the tire, turn the com-
pressor switch on.
14Inflate the tire until the speci-
fied air pressure is reached.
The sealant will be injected
and the pressure will spike to
between 44 psi (300 kPa, 3.0
kgf/cm
2
or bar) and 58 psi
(400 kPa, 4.0 kgf/cm
2
or bar),
then gradually decrease.
The air pressure gauge will
display the actual tire inflation
pressure about 1 to 5 min-
utes after the switch is turned
on.
Turn the compressor switch off and
then check the tire inflation pres-
sure. Being careful not to over
inflate, check and repeat the infla-
tion procedure until the specified
tire inflation pressure is reached.
The tire can be inflated for about 5
to 20 minutes (depending on the
outside temperature). If the tire
inflation pressure is still lower than
the specified point after inflation for
25 minutes, the tire is too damaged
Loading ...
Loading ...
Loading ...