Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE
56
NOTE:
This defroster is not designed for melting
sn
ow. If there is an accumulation of snow on
the rear window, remove it before using the
defroster.
Mirror Defroster (If Equipped):
To turn on the
mirror defroster, switch the ignition on and
push the Rear Window Defroster Button.
5 – Air Recirculation Button
Press the Air Recirculation Button to select
be
tween outside air and recirculated air posi-
tions.
Recirculated Air Position:
(LED On) Outside
air is shut off when this position has been
activated. Use this position when going
through tunnels, driving in congested traffic
(high engine exhaust areas), or when quick
cooling of the vehicle is desired.
Outside Air Position:
(LED Off) Outside air is
allowed to enter the cabin. Use this mode for
ventilation or windshield defrosting.
NOTE:
Do not use the Recirculated Air Position in
co
ld or rainy weather. Using the Recirculated
Air Position in cold or rainy weather is
dangerous as it will cause the windows to fog
up. Your vision will be hampered, which
could lead to a serious accident.
6 – A/C Button
Push the A/C Button to turn on the air condi-
tioner.
The LED on the switch will illuminate when
t
h
e Blower Control Knob is in any position
except the off position.
Push the button again to turn off the air
co
nditioner.
NOTE:
The air conditioner may not function when
t
h
e outside temperature approaches 32°F
(0°C).
Operation Of Automatic Air Conditioning
Proceed as follows:
1. Set the mode selector knob to the AUTO
p
osition.
2. Set the Air Recirculation Button to the
o
utside air position (indicator light
turned off).
NOTE:
If the recirculated air position is used for
l
o
ng periods in cold weather or high
humidity, the windshield may fog up more
easily.
3. Set the Blower Control Knob to the AUTO
p
osition.
4. Push the A/C button to operate the air
c
onditioning (indicator light on).
5. Set the Temperature Control Knob to the
d
esired position.
6. To turn off the system, set the blower
c
ontrol knob to the 0 position.
Setting the temperature to maximum hot or
co
ld will not provide the desired temperature
at a faster rate.
When selecting heat, the system will restrict
ai
r flow until it has warmed to prevent cold
air from blowing out of the vents.
For an optimal cabin temperature, set the
te
mperature close to 77°F (25°C). Adjust to
the desired temperature if necessary.
Loading ...
Loading ...
Loading ...