Loading ...
Loading ...
Loading ...
103
Master Warning Light
Vehicles Equipped With Fiat Connect 3.0 System
The warning light turns on continuously if there is a malfunction in the battery management system or there is a
m
a
lfunction in the brake switch. Contact an authorized dealer as soon as possible.
Vehicles Equipped With Fiat Connect 7.0 System
The warning light turns on when the system has a malfunction. Operate the center display and verify the content.
Contact an authorized dealer as soon as possible.
Cold Start Disable Indicator Light
When the ambient temperature is extremely low, the engine may not crank even when the engine starting procedure is
pe
rformed. At this time, the Cold Start Disable Indicator light in the instrument cluster flashes. However, this does not
indicate a problem.
NOTE:
Place your vehicle in a warm garage until the temperature has risen to a sufficient level to enable engine starting.
Electric Throttle Control Warning Light
This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the
en
gine is running, the light will either stay on or flash depending on the nature of the problem. Cycle the ignition key when
the vehicle is safely and completely stopped and the transmission is placed in the PARK position. The light should turn
off. If the light remains on with the engine running, your vehicle will usually be drivable; however, see an authorized dealer
for service as soon as possible.
If the light continues to flash when the engine is running, immediate service is required and you may experience reduced
pe
rformance, an elevated/rough idle, or engine stall and your vehicle may require towing. The light will come on when the
ignition is first turned to ON/RUN and remain on briefly as a bulb check. If the light does not come on during starting,
have the system checked by an authorized dealer.
Warning Light What It Means
Loading ...
Loading ...
Loading ...