Loading ...
Loading ...
Loading ...
13
Key Fob Functions
With A Vehicle Security Alarm System
The hazard warning lights will flash when the
ve
hicle security alarm system is armed or
disarmed.
With Advanced Keyless Function
A beep will sound when the doors, trunk lid,
an
d fuel filler door are locked or unlocked
using the key fob. The beep volume can be
adjusted or turned off.
Use the following procedure to change the
be
ep setting:
1. Place the ignition to the OFF position,
a
nd close the doors and the trunk lid.
2. Open the driver's door.
3
. Within 30 seconds of opening the driver's
d
oor, push and hold the lock button on
the key fob for five seconds.
NOTE:
The doors, trunk lid, and fuel filler door
will lock, and the beep will activate at the
current volume (if the beep is currently set
to not activate, it will not activate).
The setting changes when the lock button
on the key fob is pushed, and the beep will
activate at the set volume (if the beep
sound has been set to not activate, it will
not activate).
Complete changing the setting by doing any
of
the following:
Placing the ignition in the ACC or ON posi-
tion.
Closing the driver's door.
Opening the trunk lid.
Not operating the key fob for ten seconds.
Pushing any button, except the lock
button on the key fob.
Pushing a request switch on the exterior
door handle.
NOTE:
Refer to “Doors” in this chapter for further
i
n
formation.
The operation indicator light on the key fob
fl
ashes when the buttons are pushed.
Key Fob Buttons
Lock Button
To lock the doors, trunk lid, and fuel filler
do
or, push the lock button on the key fob.
The hazard warning lights will flash once and
a beep will sound.
Unlock Button
To unlock the doors and trunk lid, push the
un
lock button on the key fob, and the hazard
warning lights will flash twice.
The system can be set to unlock both doors.
Us
e the following procedure to change the
setting:
1. Place the ignition in the OFF position,
a
nd close the doors and trunk lid.
2. Open the driver's door.
3
. Within 30 seconds of opening the driver's
d
oor, push and hold the unlock button on
the key fob for five seconds.
NOTE:
The sound of the doors locking/unlocking
can be heard. After this, the system will
change the setting when the unlock button is
pushed (the sound of the doors locking/
unlocking can be heard).
Loading ...
Loading ...
Loading ...