Loading ...
Loading ...
Loading ...
SERVICING AND MAINTENANCE
254
3. Tilt the blade assembly and remove it
from the arm.
Blade Assembly and Arm
4. Pull down the blade rubber and slide it
o
ut of blade holder.
Blade Holder
5. Remove the metal stiffeners from each
b
lade rubber and install them in the new
blade.
Metal Stiffeners
NOTE:
Do not bend or discard the stiffeners, they
will be reused.
If the metal stiffeners are switched, the
blade's wiping efficiency could be
reduced. Do not use the driver's side metal
stiffeners on the passenger's side, or vice
versa.
Be sure to reinstall the metal stiffeners in
the new blade rubber so that the curve is
the same as it was in the old blade rubber.
6. Carefully insert the new blade rubber.
T
hen install the blade assembly in the
reverse order of removal.
Reassemble Blade
WARNING!
To prevent damage to the windshield let
the wiper arm down easily, do not let it
slap down on the windshield.
Loading ...
Loading ...
Loading ...