Loading ...
Loading ...
Loading ...
STARTING AND OPERATING
182
3. Once the vehicle starts to enter the
parking space, proceed slowly in
REVERSE while keeping the vehicle
width guide lines away from the two sides
of the parking space.
4. Continue to adjust the steering wheel
u
ntil the vehicle width guide lines are
parallel with the two sides of the parking
space.
5. Once the guide lines are parallel,
s
traighten the steering wheel and reverse
slowly into the parking space. Continue
to check the vehicle’s surroundings and
stop in the best position possible.
Entering Parking Spot
6. When the gear selector is moved from the
R
EVERSE position and put in any other
position, the screen returns to the
previous display mode.
NOTE:
Since there may be some differences
between the displayed image and the real
conditions, always visually inspect the
area behind the vehicle, and the
surrounding areas, to make sure they are
completely clear.
In the image of the parking space (or
garage) shown above, the rear of the
vehicle and the distance guide lines may
seem parallel on the monitor, but may not
be when the parked vehicle is inspected.
When you enter a parking space with a
dividing line only on one side, the dividing
line and the vehicle width guide lines may
appear parallel on the monitor, but may
not be when the parked vehicle is
inspected.
Road Conditions And Displayed Image
There are some differences between what is
shown on the display, and the actual road
conditions.
The different perceptions of distance could
le
ad to an accident. The conditions that can
lead to the different perceptions of distance,
listed below, must be taken into consider
-
ation:
When The Vehicle Slopes Due To The
Weight Of Passengers And Load:
When the vehicle is rear heavy, the object
on
the screen seems to be farther away
than it really is.
Loaded Vehicle Camera Angle
1 — Object
2 — Variance
Loading ...
Loading ...
Loading ...