Loading ...
Loading ...
Loading ...
281
NOTE:
Scratches or nicks on the panels and
metallic trim resulting from the use of a
hard brush or cloth may not be repairable.
Be particularly careful when cleaning high
gloss panels and metallic trim as they can
be easily scratched.
Lap / Shoulder Belt
Clean the webbing with a mild soap solution
re
commended for upholstery or carpets.
Follow instructions. Do not bleach or dye the
belts, this may weaken them.
After cleaning the belts, thoroughly dry the
be
lt webbing and make sure there is no
remaining moisture before retracting them.
Plastic And Coated Parts
Clean interior plastic parts with a damp cloth
(if possible made from microfiber), and a
solution of water and neutral, non-abrasive
detergent.
To clean oily or persistent stains, use
sp
ecific products free from solvents and
designed to maintain the original appearance
and color of the components.
Remove any dust using a microfiber cloth, if
ne
cessary moistened with water. The use of
paper tissues is not recommended as these
may leave residues.
Instrument Panel Precautions
Prevent caustic solutions such as perfume and
co
smetic oils from contacting the instrument
panel. They will damage and discolor the
instrument panel. If these solutions get on the
instrument panel, wipe them off immediately.
NOTE:
Never use alcohol, gasoline and derivatives
to
clean the instrument panel lens.
Instrument Panel Top
When cleaning, it is recommended that you
us
e a clean towel dampened in a mild deter-
gent to remove debris.
Window Interiors
If the windows become covered with an oily,
greasy, or waxy film, clean them with glass
cleaner. Follow the directions on the
container.
CAUTION!
Do not wipe leather parts using alcohol,
chlorine bleach, or organic solvents such
as thinner, benzene, or gasoline.
Otherwise, it may cause discoloration or
stains.
WARNING!
A frayed or torn belt could rip apart in a
collision and leave you with no protection.
Inspect the belt system periodically,
checking for cuts, frays, or loose parts.
Damaged parts must be replaced
immediately. Do not disassemble or modify
the system. Seat belt assemblies must be
replaced after a collision if they have been
damaged (i.e., bent retractor, torn
webbing, etc.).
CAUTION!
Do not use glazing agents. Glazing agents
contain ingredients which may cause
discoloration, wrinkling, cracks and
peeling.
CAUTION!
If the surface is rubbed harshly, it could
result in the surface being damaged
leaving white scratch marks.
Loading ...
Loading ...
Loading ...