Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY
200
Abarth Rear Lights
Replacing Exterior Lights
Headlights (low beam) (If Equipped with
halogen bulb)
Proceed as follows:
1. I
f you are changing the right bulb, start
t
he engine, turn the steering wheel all
the way to the right, and turn off engine.
If you are changing the left bulb, turn the
steering wheel to the left.
2. Make sure the ignition is placed in the
O
FF mode, and the headlight switch is
off.
3. Remove the fasteners in the seven loca-
t
ions and partially peel back the mud
gu
ard.
Mud Guard
4. Turn the cover counterclockwise and
r
emove it, disconnect the connector from
the unit by pressing the tab on the
connector with your finger and pulling
the connector.
5. Turn the socket and bulb assembly coun-
t
erclockwise and remove it.
6. D
isconnect the bulb from the socket.
7
. Install the new bulb in the reverse order
o
f the removal procedure.
Headlights (High Beam) With Daytime Running
Li
ghts (If Equipped With LED Lamps)
Proceed as follows:
1. I
f you are changing the right bulb, start
t
he engine, turn the steering wheel all
the way to the right, and turn off engine.
If you are changing the left bulb, turn the
steering wheel to the left.
2. Make sure the ignition is placed in the
O
FF mode, and the headlight switch is
off.
3. Remove the fasteners in the seven loca-
t
ions and partially peel back the mud
gu
ard.
4. Turn the socket and bulb assembly coun-
t
erclockwise and remove it.
4 — Position Light/Stop Light/Rear Direc-
tion Indicator Light
5 — Reverse Light — If Equipped
6 — Third Stop Light
1 — Fasteners
2 — Mud Guard
Loading ...
Loading ...
Loading ...