Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY
210
5. Inspect the fuse and replace it if it is
blown.
Fuses
6. Insert a new fuse of the same amperage
r
ating, and make sure it fits tightly. If it
does not fit tightly, contact an authorized
dealer. If you have no spare fuses, borrow
one of the same rating from a circuit not
essential to vehicle operation, such as
the audio or outlet circuit.
7. Reinstall the cover and make sure that it
i
s securely installed.
NOTE:
Always replace a fuse with a genuine FCA
fu
se or equivalent of the same rating. Other-
wise you may damage the electric system.
Underhood Fuses
If the headlights or other electrical compo-
nents do not work and the fuses in the cabin
ar
e normal, inspect the fuse block in the
engine compartment. If a fuse is blown, it
must be replaced.
Make sure the ignition is placed in the OFF
mo
de, and other switches are turned off and
remove the fuse block cover. If the lock is
forcefully opened, the fuse block cover may
come in contact with the frame when it is
removed and become scratched.
When removing the cover, remove it slowly
ac
cording to the following procedure:
1. Disengage the rear lock by pressing down
o
n the front tab with your fingers.
Underhood Fuse Block
2. R
emove the front tab while slightly lifting
t
he front of the cover.
3. Remove the cover while lifting it and
s
liding it to the rear.
4. If any fuse but the main fuse is blown,
r
eplace it with a new one of the same
amperage rating.
Fuses
5. R
einstall the cover and make sure that it
i
s securely installed.
1 — Normal Fuse
2 — Blown Fuse
1 — Lock
2 — Cover
1 — Normal Fuse
2 — Blown Fuse
Loading ...
Loading ...
Loading ...