Loading ...
Loading ...
Loading ...
29
To Unlock
Driver's door button is located on the exterior
do
or handle.
To unlock the doors, trunk lid, and fuel filler
do
or, push the button on the exterior door
handle; the hazard warning lights will flash
twice.
To unlock both doors and fuel filler door,
pu
sh the button on the exterior door handle
twice within three seconds. Two more beeps
will sound.
Front Passenger Door Request Switch:
To unlock both doors and fuel filler door,
pu
sh the button on the exterior door handle.
A beep will sound twice; the hazard warning
lights will flash twice.
NOTE:
Confirm that both doors, and fuel filler
door are securely locked.
For the trunk lid, move it without pushing
the electric trunk lid opener to verify that
the trunk lid has not been left open.
Both doors and the fuel filler door cannot
be locked when any door is open.
It may require a few seconds for the doors
to unlock after the request switch on the
exterior door handle is pushed.
The key fob may not be able to be detected
by the vehicle keyless-go system if it is
located next to a mobile phone, laptop or
other electronic device; these devices may
block the key fob’s wireless signal and
prevent the keyless-go system from
starting the vehicle.
A beep sound is heard for confirmation when
th
e doors, and fuel filler door are locked/
unlocked using the request switch on the
exterior door handle. If you prefer, the beep
sound can be turned off.
The volume of the beep sound can also be
ch
anged. Use the following procedure to
change the setting:
1. Place the ignition in the OFF position and
c
lose both of the doors and the trunk lid.
2. Open the driver's door.
3
. Within 30 seconds of opening the driver's
d
oor, push and hold the lock button on
the key fob for five seconds or longer. The
doors, and fuel filler door will lock, an
audible beep will activate at the currently
set volume (if the beep sound is currently
set to not activate, it will not activate).
The setting changes each time the lock
button on the key fob is pushed and the
beep will activate at the set volume (if
the beep sound has been set to not acti
-
vate, it will not activate).
4. The setting change is completed by doing
a
ny one of the following:
Place the ignition in the ACC or ON
position
Closing the driver's door
Opening the trunk lid
Not operating the key fob for 10 seconds
Pushing any button except the lock
button on the key fob
Pushing a request switch on the exte-
rior door handle
With Vehicle Security Alarm System
The hazard warning lights flash when the
s
e
curity alarm system is armed or disarmed.
Refer to “Vehicle Security Alarm System” in
this chapter for further information.
The setting can be changed so that the doors
an
d the fuel filler door are locked automati-
Loading ...
Loading ...
Loading ...