Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY
218
Proceed as follows:
1. Loosen the lug nuts by turning them
c
ounterclockwise one turn each, but do
not remove any lug nuts until the tire has
been raised off the ground.
Loosen Lug Nuts Counterclockwise
2. P
lace the jack under the lift point closest
t
o the tire being changed with the jack
head squarely under the jacking location.
3. Turn the jack screw in the direction
s
hown and adjust the jack head so that it
is close to the jacking location.
Raising The Jack
4. Continue raising the jack head gradually
b
y rotating the screw with your hand until
the jack head is inserted into the lift
point.
Front Jacking Location
Always park on a firm, level surface as
far from the edge of the roadway as
possible before raising the vehicle.
Turn on the Hazard Warning flasher.
Block the wheel diagonally opposite the
wheel to be raised.
Apply the parking brake firmly and set
the transmission in PARK.
Do not let any passenger sit in the
vehicle when it is on a jack.
Do not get under the vehicle when it is
on a jack. If you need to get under a
raised vehicle, take it to a service center
where it can be raised on a lift.
Only use the jack in the positions indi-
cated and for lifting this vehicle during a
ti
re change.
If working on or near a roadway, be
extremely careful of motor traffic.
WARNING! (Continued)
1 — Jack Head
CAUTION!
Do not attempt to raise the vehicle by
jacking on locations other than those
indicated in the Jacking Instructions for
this vehicle.
Loading ...
Loading ...
Loading ...