Loading ...
Loading ...
Loading ...
51
NOTE:
If the air conditioner is used while driving
up large hills or in heavy traffic, monitor
the Engine Coolant Temperature Warning
Light to see if it is illuminated or flashing.
The air conditioner may cause engine
overheating in these situations. If the
warning light is illuminated or flashing,
turn the air conditioning off immediately.
When maximum cooling is desired, set the
Temperature Control Knob to the extreme
cold position, push the Air Recirculation
Button to activate the recirculated air
position, and then turn the fan control dial
fully clockwise.
If warmer air is desired at floor level, set
the Mode Selector Knob to the posi-
tion, and adjust the Temperature Control
Kn
ob to maintain comfort.
The floor vents will blow warmer air while
the side air vents will blow cooler air
(except when the temperature control dial
is set at the maximum hot or cold posi
-
tion).
Ventilation
Proceed as follows:
1. Set the Mode Selector Knob to the
position.
2. Set the Air Recirculation Button to the
o
utside air position.
3. Set the Temperature Control Knob to the
d
esired position.
4. Set the Blower Control Knob to the
d
esired speed.
Windshield Defrosting And Defogging
Proceed as follows:
1. Set the Mode Selector Knob to the Front
De
frost position.
2. Set the Temperature Control Knob to the
de
sired position.
3. Set the Blower Control Knob to the desired
sp
eed.
4. If dehumidified heating is desired, turn on
th
e air conditioner.
NOTE:
For maximum defrosting, turn on the air
conditioner, set the Temperature Control
Knob to the extreme hot position, and turn
the Blower Control Knob fully clockwise.
If warm air is desired from the floor vents,
set the Mode Selector Knob to the posi-
tion.
If equipped with MAX A/C, the Recircula-
tion Button can be set to the Recirculated
Ai
r position, when the Blower Control
Knob is on, and the Mode Selector Knob is
set to the Front Defrost position.
WARNING!
Set the temperature control to the hot or
warm position when defogging (Front
Defrost position). Using the Front Defrost
position with the temperature control set
to the cold position is dangerous as it will
cause the outside of the windshield to fog
up. Your vision will be hampered, which
could lead to a serious accident.
Loading ...
Loading ...
Loading ...