Loading ...
Loading ...
Loading ...
Scan Using the Control Panel
136
6
1 Choose Network in Scan to FTP/Network from the Scan tab. Click Submit.
2 Choose the Profile you want to configure in Scan to FTP/Network Profile.
3 Enter the name that you want to use for the Scan to Network profile. This name will be displayed on the
LCD of the machine and can be up to 15 characters.
4 The Host Address is the domain name of the CIFS server. Enter the Host Address (for example
mypc.example.com) (up to 64 characters) or the IP address (for example 192.23.56.189).
5 Enter the destination folder where your document will be stored on the CIFS server (for example
brother\abc) (up to 60 characters).
6 Follow the steps from 8 to 9 of Configure the FTP Default Settings on page 130.
7 If you want to protect the profile, choose On from Use PIN for Authentication and enter a 4-digit PIN
number in PIN Code.
8 Choose the authentication method. You can choose Auto, Kerberos or NTLMv2. If you choose Auto,
the authentication method will be detected automatically.
9 Enter the Username that has been registered with the CIFS server for the machine (up to 96 characters).
0 Enter the Password for access to the CIFS server (up to 32 characters).
A Click Submit.
B Choose Date&Time from the General tab.
C Enter the date and time used on the CIFS server.
D Choose the time zone from the pull-down list.
E Click Submit.
Loading ...
Loading ...
Loading ...