Loading ...
Loading ...
Loading ...
Using the 360 Round program
56
Video
•
Mode
: Set the recording mode.
–
Aperture priority
: Set the shutter speed to be adjusted automatically according to the
aperture value set by the user.
–
Manual
: Set the shutter speed and aperture value to be set manually by the user.
•
Quality
: Set the quality of the video. The higher the quality, the higher the video’s size will
be.
•
Frame rate
: Set the number of frames to be recorded per second.
–
NTSC:29.97
: Set to record 30 frames per second.
–
PAL:25.00
: Set to record 25 frames per second.
•
EV
: Adjust the exposure value. The exposure value is set automatically depending on
the balance of brightness in the composition or the position of the main subject. Set the
exposure value higher if the video is dark or set the exposure value lower if the video is
bright.
•
ISO
: The ISO image sensor determines the sensitivity to light. The higher the ISO, the
more sensitive the light is, so you can record bright videos in dark environments.
However, as the ISO increases, the grain will be rougher and the noise will increase.
–
ISO Limit
: When
Auto
is selected in
ISO
, the maximum value of the ISO value is set
and can not be adjusted beyond its maximum value.
•
Shutter speed
: The shutter speed determines the exposure time that the camera (image
sensor) accepts light.
•
F number
: Select an aperture size between
F 1.8
and
F 2.8
. The smaller the F value,
the larger the diameter of the diaphragm and more light is allowed to pass through to
change the brightness of the camera.
•
Metering
: Set the metering method. You can change the way light is measured on the
recording screen.
–
Multi
: Measure the light and apply the average value to the video using the camera
on the top and the 8 cameras on the right side.
–
Center
: Measure the light in front of and around the camera and apply it to your
video.
–
Spot
: Only the light from the camera you select will be measured and applied to the
video.
Loading ...
Loading ...
Loading ...