Loading ...
Loading ...
Loading ...
28
©
2019 DJI All Rights Reserved.
ROBOMASTER S1
User Manual
Status LED Description
The status LED indicates the working status and current battery level of the gamepad.
Status LED Description
Blinks green slowly The gamepad is charging
Blinks red quickly The gamepad’s battery level is 0%
Solid red The gamepad’s battery level is between 1% to 29%
Solid yellow The gamepad’s battery level is between 30% to 69%
Solid green The gamepad’s battery level is between 70% to 100%
Solid blue The gamepad is initializing
Specications
Model GD0MA
Built-in Battery Type 3.6 V, 2600 mAH, 1S1P
Working Hours* Approx. 2 hours
USB Port 500 mA / 5 V
Operation Temperature Range -10° to 45° C (14° to 113° F)
Charging Temperature Range 0° to 45° C (32° to 113° F)
Charging Hours* Approx. 2 hours
* The working hours were tested using an Android device, and the charging hours were tested
using a 10 W USB charger at a temperature of 25° C (77° F). Both the working hours and the
charging hours were tested in a lab environment, and should be taken as a reference only.
Charging the Gamepad
It is recommended to fully charge the gamepad before using for the rst time.
110-220V
Firmware Update
The rmware of the gamepad can be updated using the RoboMaster app. When there is a rmware
update available, the RoboMaster app will send a prompt after the gamepad is connected. Follow
the prompts to update the rmware.
Make sure the mobile device is connected to the internet when downloading the rmware.
Internet
It takes approximately two hours to fully
charge a gamepad. The USB charger is not
included in the package.
Loading ...
Loading ...
Loading ...