Loading ...
Loading ...
Loading ...
24
©
2019 DJI All Rights Reserved.
ROBOMASTER S1
User Manual
Battery Level Indicators for Battery Protection
LED1 LED2 LED3 LED4 Blinking Pattern Battery Protection Item
LED2 blinks twice per second Over current detected
LED2 blinks three times per second Short circuit detected
LED3 blinks twice per second Over charge detected
LED3 blinks three times per second Over-voltage charger detected
LED4 blinks twice per second
Charging temperature is too
low (<0°C)
LED4 blinks three times per second
Charging temperature is too
high (>40°C)
After any of the above-mentioned protection issues are resolved, the Battery Level Indicator will
power off. Unplug the Intelligent Battery from the charger and plug it back in to resume charging.
Note that you do not need to unplug and re-plug the charger in the event of a charging temperature
error. Charging will resume when the temperature falls within the normal range.
DJI is not responsible for damage caused by third-party chargers.
Mounting the Intelligent Battery
When in use, open the rear armor cover and insert the battery into the battery compartment.
Make sure the battery is securely installed. Otherwise, the battery may fall out or have
insufcient contact, which can lead to loss of battery information.
Make sure to press the battery eject button before removing the battery.
1
2
3
Loading ...
Loading ...
Loading ...