Loading ...
Loading ...
Loading ...
22
©
2019 DJI All Rights Reserved.
ROBOMASTER S1
User Manual
Intelligent Battery Functions
1. Battery Level Display: LEDs display the current battery level.
2. Auto-Discharging Function: The battery automatically discharges to below 70% of total power
when it is idle for more than 10 days to prevent swelling. To exit the idle state, press the power
level button to check the battery level. It takes approximately one day to discharge the battery to
60%. It is normal to feel moderate heat emitting from the battery during the discharge process.
3. Balancing Function: Automatically balances the voltage of each battery cell when charging.
4. Overcharge Protection: Charging stops automatically when the battery is fully charged.
5. Temperature Protection: The battery only charges when the temperature is 5 to 45° C (41 to 113° F).
6. Overcurrent Protection: Battery stops charging when high amperage is detected.
7. Over-Discharge Protection: To prevent serious damage to the battery, the current output will be cut off
when the battery cell is discharged to 2.5 V and not in use. To extend operating times, overcharging
protection is disabled as batteries discharge during usage. In this instance, a battery voltage below 1
V may cause a safety hazard such as a re when charged. To prevent this, the battery will not be able
to charge if the voltage of a single battery cell is below 1 V. Avoid using any batteries matching this
description. Always be alert to avoid over-discharging to prevent permanent battery damage.
1. Power Button
2. Battery Level Indicator
1
2
LED1
LED2 LED3
LED4
Speaker
The S1 speaker is compatible with a 2.5 mm device with a power rating of 2 W. The speaker
provides users with a more immersive experience with sound effects such as when the S1 launches
gel beads or is hit by another S1.
Make sure the speaker is properly installed and does not obstruct gimbal movements.
Intelligent Battery
The Intelligent Battery has a capacity of 2400 mAh, a voltage of 10.8 V, and a variety of power
management functions.
Loading ...
Loading ...
Loading ...