Loading ...
Loading ...
Loading ...
©
2019 DJI All Rights Reserved.
23
ROBOMASTER S1
User Manual
8. Short Circuit Protection: Automatically cuts the power supply when a short circuit is detected.
9. Battery Cell Damage Protection: The RoboMaster app displays a warning message when a
damaged battery cell is detected.
10. Sleep Mode: Sleep mode is entered to save power when the battery is not in use. If the battery
is turned on without being connected to the S1, the battery will turn off after ve minutes. When
the battery power is less than 5%, it will automatically enter sleep mode after six hours to
prevent over-discharging. If this occurs, press the battery power button once, and the battery
can be charged to wake up.
11. Communication: Battery voltage, capacity, current, and other relevant information is provided to
the gimbal.
Read the user manual, disclaimer, and descriptions on the battery before use. Users take
full responsibility for all operations and usage.
Charging the Intelligent Battery
The S1 Battery Charger is designed for charging batteries for the S1. Lift the battery charger cover
and insert the intelligent battery. Connect the battery charger to a power outlet (100-240 V, 50/60 Hz).
Charging Time: Approx. 1 hour and 30 mins
Before using for the rst time, charging is required to wake up the battery.
Make sure the battery is fully charged before each use.
When the charger is not in use, keep the battery charger covered in order to prevent the
metal terminals from being exposed.
Status LED Descriptions
Battery Level Indicators while Charging (Battery)
LED1 LED2 LED3 LED4 Battery Level
0%~50%
50%~75%
75%~100%
Fully Charged
1
2
3
100-240 V
50-60 Hz
Loading ...
Loading ...
Loading ...