Loading ...
Loading ...
Loading ...
169
■■
■■
■ UPC Non-PLU code format (2 ITEM SETUP
➝
6 UPC NON-PLU ....... PGM2)
The register allows you to specify the Non-PLU code format (System sign(Flag code): 2, 02, 20 -29).
These formats control scanned barcodes accepted and how the scanned information is treated by the
system.
The format data is as follows:
C
D
Free formatFlag
(02 or 20-29)
Field 2Field 1
Free format area
Price check digit
2
C
D
Free format
Flag
Format table no.: max. 2 digits (1 to 12)
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [2 ITEM SETUP] button to display the menu, and touch the [6 UPC NON-PLU] button to
display the code format list.
(3) Touch the code format number button to program the non PLU code format.
(The [INHIBIT] button is not assigned the code format yet.)
(4) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (4) satisfactorily.
(5) To terminate the programming, touch the [EXIT] key.
Text Parameter
EAN8: EAN-8 format code
TYPE OF CODE EAN13: EAN-13 format code
(UPC-A is “0n”of EAN13)
SYSTEM CODE n:EAN8, nn:EAN13(UPC-A)
LENGTH FLD#1 Length of field 1 (0 to 9)
LENGTH FLD#2 Length of field 2 (0 to 9)
Meaning of field 2
FIELD#2 DATA QUANTITY: quantity
PRICE: Price
Price Check digit
PRICE C/D YES: Use the price check digit
NO: Not use the price check digit
TAB TAB or decimal point of field 2 : 3/2/1/0
•
When the “DEL” key is touched on table number selection menu, the table is deleted.
•
When the field 2 is programmed as “QUANTITY”, the sales amount is calculated as (quantity x
programmed unit price).
•
The initial programming data is showed by following tables.
Loading ...
Loading ...
Loading ...