Loading ...
Loading ...
Loading ...
Chapter 2. Configuring System Information | 85
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Stack Port Configuration
To display the Stack Port Configuration page, click System > Stacking > Advanced> Stack
Port Configuration. A screen similar to the following displays.
1. Configured Stack Mode - Specify the operating mode of the port to be either ethernet or
stacking. The default value is set to stacking.
The following table describes Stack Port Configuration fields.
Table 2-31.
Field Description
Unit ID Displays the unit.
Port Displays the stackable interfaces on the given unit.
Running Stack Mode Displays the run-time mode of the stackable
interface.
Link Status Displays the link status (UP/DOWN) of the port.
Link Speed (Gbps) Displays the maximum speed of the stacking port.
Transmit Data Rate (Mbps) Displays the approximate transmit rate on the
stacking port.
Total Transmit Errors Displays the total number of errors in transmit
packets since boot. The counter may wrap.
Receive Data Rate (Mbps) Displays the approximate receive rate on the
stacking port.
Total Receive Errors Displays the total number of errors in receive packets
since boot. The counter may wrap.
Loading ...
Loading ...
Loading ...