Loading ...
Loading ...
Loading ...
278 | Chapter 4. Routing
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Area Range Configuration
Use the OSPF Area Range Configuration page to configure and display an area range for a
specified NSSA.
To display the Area Range Configuration page, click Routing OSPF Advanced Area
Range Configuration.
1. Use Area ID to specify the area for which data is to be configured.
2. Use IP address to enter the IP Address for the address range for the selected area.
3. Use Subnet Mask to enter the Subnet Mask for the address range for the selected area.
4. Use LSDB Type to select the type of Link Advertisement associated with the specified area
and address range. The default type is 'Network Summary'.
5. Use Advertise to select Enable or Disable. If you select Enable, the address range will be
advertised outside the area via a Network Summary LSA. The default is Enable.
6. Click ADD to add the new address range to the switch.
7. Click DELETE to remove the specified address range from the area configuration.
Loading ...
Loading ...
Loading ...