Loading ...
Loading ...
Loading ...
Chapter 5. Configuring Quality of Service | 401
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Advanced
From the Advanced link, you can access the following pages:
• CoS Configuration on page 401
• 802.1p to Queue Mapping on page 402 (Advanced)
• IP DSCP to Queue Mapping on page 403 (Advanced
• CoS Interface Configuration on page 404 (Advanced)
• Interface Queue Configuration on page 406 (Advanced)
CoS Configuration
To display the CoS Configuration page, click QoS CoS Advanced CoS Configuration.
1. Use Global to specify all CoS configurable interfaces. The option “Global” represents
the most recent global configuration settings.
2. Use Interface to specify CoS configuration settings based per-interface.
3. Use Global Trust Mode to specify whether to trust a particular packet marking at ingress.
Global Trust Mode can only be one of the following. Default value is trust dot1p.
• untrusted
• trust dot1p
• trust ip-dscp
4. Use Interface Trust Mode to specify whether to trust a particular packet marking at ingress.
Interface Trust Mode can only be one of the following. Default value is untrusted.
• untrusted
• trust dot1p
• trust ip-dscp
Loading ...
Loading ...
Loading ...