Loading ...
Loading ...
Loading ...
362 | Chapter 4. Routing
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
PIM-SM
From the PIM-SM link, you can access the following pages:
• PIM-SM Global Configuration on page 362
• PIM SSM Configuration on page 363
• PIM-SM Interface Configuration on page 364
• PIM-SM Neighbor on page 366
• PIM-SM Candidate RP Configuration on page 367
• PIM-SM BSR Candidate Configuration on page 368
• PIM-SM Static RP Configuration on page 369
PIM-SM Global Configuration
To display the PIM-SM Global Configuration page, click Routing Multicast PIM-SM
Global Configuration.
1. Use Admin Mode to set the administrative status of PIM-SM in the router. The default is
disable.
2. Use Data Threshold Rate (kbps) to enter the rate in K bits/second above which the
last-hop router will switch to a source-specific shortest path tree. The valid values are from 0
to 2000. The default value is 0
3. Use Register Threshold Rate (kbps) to enter the rate in K bits/second above which the
Rendezvous Point router will switch to a source-specific shortest path tree. The valid values
are from 0 to 2000. The default value is 0
Loading ...
Loading ...
Loading ...