Loading ...
Loading ...
Loading ...
Chapter 5. Configuring Quality of Service | 415
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
To configure the global DiffServ mode:
1. Select the administrative mode for DiffServ:
• Enable. Differentiated Services are active.
• Disable. The DiffServ configuration is retained and can be changed, but it is not
active.
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
3. If you make changes to the page, click Apply to apply the changes to the system.
The following table describes the information displayed in the Status table on the DiffServ
Configuration page:
Table 5-76.
Field Description
Class table Displays the number of configured DiffServ classes
out of the total allowed on the switch.
Class Rule table Displays the number of configured class rules out of
the total allowed on the switch.
Policy table Displays the number of configured policies out of the
total allowed on the switch.
Policy Instance table Displays the number of configured policy class
instances out of the total allowed on the switch.
Policy Attributes table Displays the number of configured policy attributes
(attached to the policy class instances) out of the
total allowed on the switch.
Service table Displays the number of configured services
(attached to the policies on specified interfaces) out
of the total allowed on the switch.
Loading ...
Loading ...
Loading ...