Loading ...
Loading ...
Loading ...
266 | Chapter 4. Routing
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
The source IP address is compared to the destination IP address of the route. The source IP
netmask in the access list rule is treated as a wildcard mask, indicating which bits in the
source IP address must match the destination address of the route. (Note that a 1 in the
mask indicates a “don't care” in the corresponding address bit.)
When an access list rule includes a destination IP address and netmask (an extended access
list), the destination IP address is compared to the network mask of the destination of the
route. The destination netmask in the access list serves as a wildcard mask, indicating which
bits in the route's destination mask are significant for the filtering operation.
RIP Route Redistribution Summary
This screen displays the RIP Route Redistribution Configurations.
Table 27.
Field Description
Source The Source Route to be Redistributed by RIP.
Metric The Metric of redistributed routes for the given
Source Route. Displays “Unconfigured” when not
configured.
Match List of Routes redistributed when “OSPF” is selected
as Source. The list may include one or more of:
• Internal: Sets Internal OSPF Routes to be
redistributed
• External Type 1: Sets External Type 1 OSPF
Routes to be redistributed
• External Type 2: Sets External Type 2 OSPF
Routes to be redistributed
• NSSA External Type 1: Sets NSSA External
Type 1 OSPF Routes to be redistributed
• NSSA External Type 2: Sets NSSA External
Type 2 OSPF Routes to be redistributed
Distribute List The Access List that filters the routes to be
redistributed by the Destination Protocol. Displays 0
when not configured.
OSPF
From the OSPF link, you can access the following pages:
• Basic on page 267
• Advanced on page 268
Loading ...
Loading ...
Loading ...