Loading ...
Loading ...
Loading ...
606 | Appendix A. Default Settings
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
LLDP Enabled
LLDP-MED Disabled
MAC Table Address Aging 300 seconds (Dynamic Addresses)
DHCP Layer 2 Relay Disabled
Default VLAN ID 1
Default VLAN Name Default
GVRP Disabled
GARP Timers Leave: 60 centiseconds
Leave All: 1000 centiseconds
Join: 20 centiseconds
Voice VLAN Disabled
Guest VLAN Disabled
RADIUS-assigned VLANs Disabled
Double VLANs Disabled
Spanning Tree Protocol (STP) Enabled
STP Operation Mode IEEE 802.1s Multiple Spanning Tree
Optional STP Features Disabled
STP Bridge Priority 32768
Multiple Spanning Tree Enabled
Link Aggregation No Link Aggregation Groups (LAGs) configured
LACP System Priority 1
Routing Mode Disabled
OSPF Admin Mode Enabled
OSPF Router ID 0.0.0.0
IP Helper and UDP Relay Enabled
RIP Enabled
VRRP Disabled
Tunnel and Loopback Interfaces None
IPv6 Routing Disabled
DHCPv6 Disabled
Table 9. Default Settings (Continued)
Feature Default
Loading ...
Loading ...
Loading ...