Loading ...
Loading ...
Loading ...
522 | Chapter 6. Managing Device Security
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Captive Portal Trap Flags
Use this page to configure whether or not SNMP traps are sent from the Captive Portal and to
specify captive portal events that will generate a trap. All CP SNMP traps are disabled by
default.
To display the Captive Portal Trap Flags page, click Security
Control> Captive Portal CP
Trap Flags.
1. CP Trap Mode - Displays the captive portal trap mode status. To enable or disable the
mode, use the System > SNMP>SNMPv1/v2>Trap Flags page.
2. If you enable the Client Auth Failure field, the SNMP agent sends a trap when a client
attempts to authenticate with a captive portal but is unsuccessful.
3. If you enable the Client Connect field, the SNMP agent sends a trap when a client
authenticates with and connects to a captive portal.
4. If you enable the Client DB Full field, the SNMP agent sends a trap each time an entry
cannot be added to the client database because it is full.
5. If you enable the Client Disconnect field, the SNMP agent sends a trap when a client
disconnects from a captive portal.
Loading ...
Loading ...
Loading ...