Loading ...
Loading ...
Loading ...
Chapter 8. Maintenance | 597
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
To configure the settings and ping a host on the network:
1. Use IP Address/Host Name to enter the IP address or Hostname of the station you
want the switch to ping. The initial value is blank. The IP Address or Hostname you
enter is not retained across a power cycle.
2. Optionally, configure the following settings:
• Count - Enter the number of echo requests you want to send. The initial value is
default value. The Count you enter is not retained across a power cycle.
• Interval(secs) - Enter the Interval between ping packets in seconds. initial value is
default value. The Interval you enter is not retained across a power cycle.
• Datagram Size - Enter the Size of ping packet. initial value is default value. The Size
you enter is not retained across a power cycle.
3. PING displays the result after the switch sends a Ping request to the specified address.
4. Click Cancel to cancel the operation on the screen and reset the data on the screen to the
latest value of the switch.
5. Click Apply to send the ping. The switch sends the number of pings specified in the Count
field, and the results are displayed below the configurable data in the Ping area.
Loading ...
Loading ...
Loading ...