Loading ...
Loading ...
Loading ...
464 | Chapter 6. Managing Device Security
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Console Port
To display the Console Port page, click Security Access > Console Port.
1. Use Serial Port Login Timeout (minutes) to specify how many minutes of inactivity
should occur on a serial port connection before the switch closes the connection. Enter
a number between 0 and 160: the factory default is 5. Entering 0 disables the time-out.
2. Use Baud Rate (bps) to select the default baud rate for the serial port connection from the
pull-down menu. You may choose from 1200, 2400, 4800, 9600, 19200, 38400, 57600, and
115200 baud. The factory default is 9600 baud.
3. Use Login Authentication List to specify which authentication list to use when you login
through Telnet. The default value is defaultList.
4. Use Enable Authentication List to specify which authentication list you are using when
going into the privileged EXEC mode. The default value is enableList.
Table 6-91.
Field Description
Character Size (bits) The number of bits in a character. This is always 8.
Flow Control Whether hardware flow control is enabled or
disabled. It is always disabled.
Stop Bits The number of stop bits per character. Its is always
1.
Parity The parity method used on the serial port. It is
always None.
Loading ...
Loading ...
Loading ...