Loading ...
Loading ...
Loading ...
Chapter 2. Configuring System Information | 81
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
To display the Stack Configuration page, click System > Stacking > Basic> Stack
Configuration. A screen similar to the following displays.
1. Use Management Unit Selected to select the unit to be managed unit and click APPLY
to move the management to the selected unit.
2. Unit ID displays the list of units of the stack. Details of the selected unit are displayed. There
is also an ADD option visible only to Admin users which can be used to pre-configure new
members of the stack.
3. Use Switch Type to specify the type of switch hardware when creating a new switch in the
stack.
4. Admin Management Preference is a 2-byte field that indicates whether the administrator
wants this unit to become a management unit in preference to another unit. The default
value for this setting is one. If the preference level is set to zero then the device cannot
become a management unit. This field is non-configurable for users with read-only access.
5. Click ADD to add a unit to the stack with the specific switch type.
6. Click DELETE to remove the selected unit from the stack.
Loading ...
Loading ...
Loading ...