Loading ...
Loading ...
Loading ...
Chapter 2. Configuring System Information | 45
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
SNTP Server Status
The SNTP Server Status table displays status information about the SNTP servers
configured on your switch. The following table describes the SNTP Global Status fields.
The following table displays SNTP Server Status information.
Table 2-12.
Field Description
Address Specifies all the existing Server Addresses. If no Server
configuration exists, a message saying “No SNTP server
exists” flashes on the screen.
Last Update Time Specifies the local date and time (UTC) that the response
from this server was used to update the system clock.
Last Attempt Time Specifies the local date and time (UTC) that this SNTP
server was last queried.
Last Attempt Status Specifies the status of the last SNTP request to this server.
If no packet has been received from this server, a status of
Other is displayed.
• Other - None of the following enumeration values.
• Success - The SNTP operation was successful and the
system time was updated.
• Request Timed Out - A directed SNTP request timed
out without receiving a response from the SNTP server.
• Bad Date Encoded - The time provided by the SNTP
server is not valid.
• Version Not Supported - The SNTP version supported
by the server is not compatible with the version supported
by the client.
• Server Unsynchronized - The SNTP server is not
synchronized with its peers. This is indicated via the 'leap
indicator' field on the SNTP message.
• Server Kiss Of Death - The SNTP server indicated that
no further queries were to be sent to this server. This is
indicated by a stratum field equal to 0 in a message
received from a server.
Requests Specifies the number of SNTP requests made to this server
since last agent reboot.
Failed Requests Specifies the number of failed SNTP requests made to this
server since last reboot.
Loading ...
Loading ...
Loading ...