Netgear ‎GSM7328FS-200NES - 26-Port SFP/Gigabit Stackable Fully Managed Switch

User Manual - Page 55

For GSM7328FS-200NES. Series: 7000 Series

PDF File Manual, 628 pages, Read Online | Download pdf file

GSM7328FS-200NES photo
Loading ...
Loading ...
Loading ...
Chapter 2. Configuring System Information | 55
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Type of Binding Specifies the type of binding for the pool.
Unallocated
Dynamic
Manual
Network Address Specifies the subnet address for a DHCP address of
a dynamic pool.
Network Mask Specifies the subnet number for a DHCP address of
a dynamic pool. Either Network Mask or Prefix
Length can be configured to specify the subnet mask
but not both.
Network Prefix Length Specifies the subnet number for a DHCP address of
a dynamic pool. Either Network Mask or Prefix
Length can be configured to specify the subnet mask
but not both. Valid Range is (0 to 32)
Client Name Specifies the Client Name for DHCP manual Pool.
Hardware Address Specifies the MAC address of the hardware platform
of the DHCP client.
Hardware Address Type Specifies the protocol of the hardware platform of the
DHCP client. Valid types are ethernet and ieee802.
Default value is ethernet.
Client ID Specifies the Client Identifier for DHCP manual Pool.
Host Number Specifies the IP address for a manual binding to a
DHCP client. Host can be set only if at least one
among of Client Identifier or Hardware Address is
specified. Deleting Host would delete Client Name,
Client ID, Hardware Address for the Manual Pool and
set the Pool Type to Unallocated.
Host Mask Specifies the subnet mask for a manual binding to a
DHCP client. Either Host Mask or Prefix Length can
be configured to specify the subnet mask but not
both.
Host Prefix Length Specifies the subnet mask for a manual binding to a
DHCP client. Either Host Mask or Prefix Length can
be configured to specify the subnet mask but not
both. Valid Range is (0 to 32)
Lease Time Can be selected as “Infinite” to specify lease time as
Infinite or “Specified Duration” to enter a specific
lease period. In case of dynamic binding infinite
implies a lease period of 60 days and In case of
manual binding infinite implies indefinite lease
period. Default Value is “Specified Duration”.
Table 2-17.
Field Description
Loading ...
Loading ...
Loading ...