Loading ...
Loading ...
Loading ...
140 | Chapter 3. Configuring Switching Information
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
To configure PVID information:
1. Click ALL to display information for all Physical ports and LAGs.
2. Select the check box next to the interfaces to configure. You can select multiple interfaces to
apply the same setting to the selected interfaces. Select the check box in the heading row to
apply the same settings to all interfaces.
3. Use Interface to select the interface you want to configure.
4. Use PVID to specify the VLAN ID you want assigned to untagged or priority tagged frames
received on this port. The factory default is 1.
5. Use Acceptable Frame Types to specify the types of frames that may be received on this
port. The options are 'VLAN only' and 'Admit All':
• When set to 'VLAN only', untagged frames or priority tagged frames received on this
port are discarded.
• When set to 'Admit All', untagged frames or priority tagged frames received on this
port are accepted and assigned the value of the Port VLAN ID for this port. With either
option, VLAN tagged frames are forwarded in accordance to the 802.1Q VLAN
specification.
6. Ingress Filtering:
• When enabled, the frame is discarded if this port is not a member of the VLAN with
which this frame is associated. In a tagged frame, the VLAN is identified by the VLAN
ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID specified for the
port that received this frame.
• When disabled, all frames are forwarded in accordance with the 802.1Q VLAN bridge
specification. The factory default is disabled.
7. Use Port Priority to specify the default 802.1p priority assigned to untagged packets arriving
at the port. The possible value is from 0 to 7.
Loading ...
Loading ...
Loading ...