Loading ...
Loading ...
Loading ...
Chapter 2. Configuring System Information | 35
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
IPv6 Network Configuration
To display the IPv6 Network Configuration page, click System > Management > Network
Interface > IPv6 Network Configuration. A screen similar to the following displays.
The IPv6 network interface is the logical interface used for in-band connectivity with the
switch via any of the switch's front panel ports. The configuration parameters associated with
the switch's network interface do not affect the configuration of the front panel ports through
which traffic is switched or routed
To access the switch over an IPv6 network you must first configure it with IPv6 information
(IPv6 prefix, prefix length, and default gateway). You can configure the IP information using
any of the following:
• IPv6 Auto Configuration
• DHCPv6
• Terminal interface via the EIA-232 port
Once you have established in-band connectivity, you can change the IPv6 information using
any of the following:
• Terminal interface via the EIA-232 port
• Terminal interface via telnet
• SNMP-based management
• Web-based management
Loading ...
Loading ...
Loading ...